| After-sales Service: | Online Service Support Free Repair Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Air-Cooled |
| Cooling Water: | Industrial Water |
| System Type: | Closed System |
| Noise Level: | Low |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| CA Series Air cooled industrial chiller | |||||||||||
| Mode Item |
CA-0.6 | CA-1 | CA-2 | CA-3 | CA-4 | CA-5 | CA-6 | CA-8(D) | CA-10(D) | ||
| nominal cooling capacity | Kcal/h 50HZ/60HZ |
1290 1548 |
2451 2941 |
4446 5332 |
6803 8163 |
8815 10578 |
11223 13468 |
13115 15738 |
17630 21156 |
22446 26935 |
|
| KW 50HZ/60HZ |
1.5 1.8 |
2.85 3.42 |
5.17 6.2 |
7.91 9.5 |
10.25 12.3 |
13.05 15.66 |
15.25 18.3 |
20.5 24.6 |
26.1 31.3 |
||
| Total input power | KW | 0.96 | 1.46 | 2.25 | 3.27 | 4.57 | 5.54 | 6.33 | 8.29 | 10.47 | |
| Power supply voltage | 1PH~220V 50HZ(60HZ) | 3PH 380V 50HZ(220V/415V/480V 50HZ/60HZ) | |||||||||
| (110V 50HZ/60HZ) | |||||||||||
| Refrigerant | Type | R22(R134a/R407C) | |||||||||
| Control mode | Capillary | Expansion valve | |||||||||
| Compressor | Type | Hermetic rotating type | Hermetic scroll type(Piston) | ||||||||
| Power(KW) | 0.45 | 0.95 | 1.73 | 2.7 | 3.52 | 4.41 | 5.2 | 3.52× 2 | 4.41× 2 | ||
| Condenser | Type | High efficient finned copper tube+ low noise outer rotor fan | |||||||||
| Cooling Air volume(m 3 /h) | 750 | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | ||
| Evaporator | Type | Water tank with coil(Shell and Tube) | |||||||||
| Chilled fluid flow(m 3 /h) | 0.258 0.31 |
0.49 0.589 |
0.89 1.068 |
1.36 1.63 |
1.76 2.11 |
2.24 2.68 |
2.63 3.15 |
3.52 4.22 |
4.47 5.37 |
||
| Tank volume(L) | 16 | 20 | 25 | 50 | 60 | 70 | 70 | 120 | 200 | ||
| inlet/outlet pipe caliber | 1" | 1" | 1" | 1" | 1" | 1" | 1" | 1-1/2" | 1-1/2" | ||
| Water pump | Power(kw) | 0.37 | 0.37 | 0.37 | 0.37 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
| Pump head(m) | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 22 | 20 | ||
| Safty protection | Compressor overheating, over current, high and low pressure, over temperature, flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing. | ||||||||||
| Dimension | L(mm) | 530 | 580 | 650 | 930 | 1000 | 1140 | 1140 | 1300 | 1530 | |
| W(mm) | 440 | 440 | 500 | 520 | 560 | 560 | 560 | 720 | 780 | ||
| H(mm) | 780 | 850 | 950 | 975 | 1070 | 1040 | 1040 | 1310 | 1430 | ||
| Weight | Kg | 50 | 73 | 100 | 135 | 150 | 175 | 180 | 310 | 450 | |
| Note: 1. nominal cooling capacity calculated according to: Inlet/outlet chilled fluid temperature: 12degree/7degree Inlet/outlet cooling air temperature: 30degree/35degree 2. Working condition: The temperature range of chilled fluid is from 5 to 35degree Temperature difference between inlet and outlet chilled fluid is from 3 to 8degree, It is better to run the chiller while the ambient temperature at or below 35degree. The above red parameters is for the particular voltage, which need to made accordingly. We reserve the right to modify the above information without further notice. |
|
||||||||||
Pre-sale service:
1. recommend the most suitable machine for customers, according to their application details.In-sale service:
1. Strictly control all the prduction process 2. Take run test, according to relevant equipment test run regulations.3. Strictly inspection the machine, before delivery4. Delivery on time.After-sale service:
1. 12 months warranty period
FAQ
China Supplies Induction Heating Power Supply
Questions and Answers:
1. Which countries your products are exported to?
Our products are sold many countries and Areas
2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
3.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
4. Which export port you use?
Any China port is ok, usually, we will use Shenzhen ,Guangzhou ,Hongkong port, it can appoint as you like.
5.How about the payment terms and delivery time ?
Payment terms for small machines: 100% T/T/ Western Union/Cash in advance.
The big machines and big amount: 30% deposit,70% before shipment (we will take relative pictures for total delivering process for customer's confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
6.If I have paid but can not receive the goods, how should I do?
Made-in-china website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear,
7.What is your nature of your company:dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to contact us
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}