Induction Forging Furnace and Hot Forming Machine for Forming Steel Rod, Iron Rod.
These models can be used to heat the rod of steel, stainless steel, copper, brass or aluminium with diameter from dia 10 to 80mm in the shaping of screws, nuts, valves, locks and other metal parts.
Advantages and characteristics:
1. The coil is usually 500mm or 1000mm long, and there are five to ten pieces of metal bars inside the coil to be heated. Coil size is depended on the rod diameter, and coils can be easily changed.
2. The output oscillating frequency is about 5-15kHz when heating rods from diameter dia 10 to 80mm, penetrating heating is maintained, at the same time, high heating efficiency can be achieved.
3. Pneumatic rod feeding system is applied, and to certain rod, only the heating power and the feeding speed are adjusted to send the red rod out continuously by step. It is very convenient to operate.
4. With the small size and tight structure, the Rod heating furnace can be put besides the press machine to ease the operation.
|Main specifications and heating ability|
|models||Max. Input Power||Heating ability of normal material|
|Steel or S.S to 1100degree|
|GMF-40 forging furnace||40kw||1.55KG/min|
|GMF-50 forging furnace||50kw||2.0 KG/min|
|GMF-90 forging furnace||90kw||3.8 KG/min|
|GMF-140 forging furnace||140kw||5.6 KG/min|
|GMF-180 forging furnace||180kw||7.5 KG/min|
|GMF-220 forging furnace||220KW||9.0 KG/min|
|GMF-280 forging furnace||280KW||11.6 KG/min|
|Models||Input voltage||Power supply wire||Circuit breaker||Cooling Water|
|GMF-40 forging furnace||Three phase|
50 or 60HZ
|10 mm soft copper wire||3P 60A||10-20L/Min,|
|GMF-50 forging furnace||12 mm soft copper wire||3P 100A|
|GMF-90 forging furnace||16 mm soft copper wire||3P 150A|
|GMF-140 forging furnace||35 mm soft copper wire||3P 250A||20-30L/Min,|
|GMF-180 forging furnace||50 mm soft copper wire||3P 300A|
|GMF-220 forging furnace||75 mm soft copper wire||3P 350A|
|GMF-280 forging furnace||90 mm soft copper wire||3P 450A||25-30L/Min,|