Ultrahigh Frequency Induction Heating Machine/Induction Heater
Brazing of the tools
Quenching of the saw tip
Shaping of the small driller
Brazing of the saw tip
1, With high frequency up to 500KHZ~1.1MHZ, the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2, IGBT and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
3, 100% Duty cycle, continuous working is allowed at maximum power output.
4, Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5, Display of heating power and heating current and oscillating frequency;
6, Simple to install, Installation can be done by unprofessional person very easily;
7, Light weight, 28KG only;
8, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
|Model||Input power||Frequency||Input voltage||Duty cycle||Heating current||retaining current||Time control||Size CM/weight|
|GUF-06 -500K||6kw||100-500KHZ||220V,50/60Hz, single-phase||80%||5-30A|
|GUF-06 -700K||6kw||100-700KHZ||220V,50/60Hz, single-phase||80%|
|GUF-06 -1100K||6kw||100-1100KHZ||220V,50/60Hz, single-phase||80%||generator:|
|"A" wth time|