Ultra High Frequency Induction Heating Machine/Heat Treatment of Gear and Shaft
Main applications and characteristics:
The utrla high frequency series are suitable for many applications, for example,
1, Heat treatment of gear and shaft
2, metal wire and foil heating
3, tiny or powder material melting
4, Brazing of the tool
5, Quenching of the saw tip
6, Shaping of the small driller
7, Brazing of the saw tip
Due to the adopting of our third generation inverting control technology, These series machines are characterized not only with high power and high frequency up to 500KHZ output, but also with high reliability .
1, With high frequency up to 500KHZ~1.1MHZ, the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
2, IGBT and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
3, 100% Duty cycle, continuous working is allowed at maximum power output.
4, Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5, Display of heating power and heating current and oscillating frequency;
6, Simple to install, Installation can be done by unprofessional person very easily;
7, Light weight, 28KG only;
8, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
|Model||Input power||Frequency||Input voltage||Duty cycle||Heating current||retaining current||Time control||Size CM/weight|
|GUF-06 -500K||6kw||100-500KHZ||220V,50/60Hz, single-phase||80%||5-30A|
|GUF-06 -700K||6kw||100-700KHZ||220V,50/60Hz, single-phase||80%|
|GUF-06 -1100K||6kw||100-1100KHZ||220V,50/60Hz, single-phase||80%||generator:|
|"A" wth time|